The 10th International Exhibition of Pipes, Fittings, Sanitary Valves,Kitchen, Bath, Sauna, Pool, Related Industries & Services (Pivex 2026)

January 2026
Tehran International Permanent Fairground
Starting time
The 10th International Exhibition of Pipes, Fittings, Sanitary Valves,Kitchen, Bath, Sauna, Pool, Related Industries & Services (Pivex 2026)

               

Introduction of the Exhibition

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves, Bath, Sauna, Related Industries & Services (Pivex 2026)

Tehran international permanent fairground

January 2026

 

The International exhibition of Pipes,Fittings,Sanitary Vales & related Industries and services. The exhibition will be held in Tehran International Exhibition Center, with the license and support of Iran Trade Promotion Organization (TPO) and Iran International Exhibition Company (IIEC). 

Take advantage of this unique opportunity to meet all the key decision-makers of an entire industry. And present your portfolio and your potentials where the international experts inform themselves about today's technologies and tomorrow's opportunities.

Valves:

Ball valves, butterfly valves, gate valves, drain valves, steam traps, check valves, throttle valves, plunger valves, solenoid valves, plug valves, reducing valves, regulating valves, safety valves, diaphragm valves, ceramic valves, release valves, hose valves, angle valves, automatic valves, hybrid actuators, actuating devices

Valve accessories:

Valve body, valve seats, bonnets, valve yokes, valve cores, bolts, nuts, spacers, flanges, paddings, seal rings, valve position transmitters & valve pressure testing devices, valve grinding machines

Pumps:

Centrifugal, vacuum, screw, metering, sewage, fire, submerged, pneumatic, chemical, petroleum, self-priming, gear pumps, magnetic drive pumps

Engineering services and software

Associations and publishers

 

Pipe and fittings group:

- All kinds of connections, hubs, conversions, bushings, elbows, tees, caps, connectors, spool nuts, clamps, collectors

- Types of iron, copper, brass, galvanized, cast iron, PVC, PEX, alloy, polyethylene, single-layer and multi-layer pipes.

- All types of valves, pipes and construction fittings for water, sewage, gas, oil, fire extinguishing

- Upstream and downstream industries of the aforementioned products

- Knowledge Based Companies

- Startups

- Insulation and sealing materials and equipment

- Raw materials, Hemp, Synthetic fibers, paste, glue and foam

- Underfloor Heating Systems

- Production lines, machines and related equipment and tools

- Implementation and monitoring and after-sales services

- New technologies used in the production of the above products, including nano technology

- Packaging and shipping

- Product export and import

- Other related services

" Exhibition's Profile "

:: Kitchen

A: Home Kitchen: Kitchen furniture, cabinets, countertops, air conditioning, fire protection, faucets & valves, pipes & drains, kitchen sink units, wall & floor tiles, outdoor cooking appliances, barbeques, decorative articles, plumbing fittings, prefabricated modules, illumination systems, ventilators & fans, accessories, design & decoration.

B: Industrial Kitchen: Food processing equipment, meat grinders, slicing, chopping and cutting tools, food preparing equipment, different cooking systems, food serving equipment, self-service lines, catering facilities, preserving equipment, industrial refrigerators and freezers, cold houses, industrial dish washers, facilities and equipment for restaurants and coffee shops, accessories.

C: Mobile and Camping Kitchen: All related equipment, tools and accessories.

:: Bath

Bathroom furniture, bath cabinets, shower cabins, sanitary wares, bathtubs, toilets, bidets, washbasins, faucets & valves, ceramics & tiles, partitions & curtains, glass & mirrors, carpets & bath mats, plumbing fittings, pipes & drains, illumination systems, decorative articles, whirlpool bath, accessories, design & decoration.

:: Sauna

Sauna equipment, steam rooms, heating & steam systems, spas & Jacuzzis, hydrotherapy bathtubs, plumbing fittings, pipes & drains, ceramics & tiles, faucets & valves, illumination systems, decorative articles, accessories, design & decoration.

:: Pool

Pool furniture, swimming & whirl pools, prefabricated pools, solariums, aquatic parks, filtration, cleaning equipment, shelters, air pools, plumbing fittings, pipes & drains, ceramics, chemical products, insulation, illumination systems, pool coating & paint, accessories, design & decoration.

Exhibition's Profile

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
 Exhibition's Profile

:: Sanitary valves group:
All types of sanitary and building valves, accessories, lever valves, simple, smart, hospital, hose and urinals
:: Pipe and fittings group:
- All kinds of connections, hubs, conversions, bushings, elbows, tees, caps, connectors, spool nuts, clamps, collectors
- Types of iron, copper, brass, galvanized, cast iron, PVC, PEX, alloy, polyethylene, single-layer and multi-layer pipes.
- All types of valves, pipes and construction fittings for water, sewage, gas, oil, fire extinguishing
- Upstream and downstream industries of the aforementioned products
- Knowledge Based Companies
- Startups
- Insulation and sealing materials and equipment
- Raw materials, hemp, synthetic fibers, paste, glue and foam
- Underfloor heating systems
- Production lines, machines and related equipment and tools
- Implementation and monitoring and after-sales services
- New technologies used in the production of the above products, including nano technology
- Packaging and shipping
- Export and Import
- Other related services

:: Kitchen group:

a. Home kitchens: types of kitchen cabinets (wooden, metal and glass), types of cabinet covers, counters, MDF, HDF, types of cabinet doors and frames, fittings and handles, sinks, ventilation devices, ventilators and kitchen hoods. , all kinds of faucets, PVC and metal pipes and fittings, all kinds of lights and lighting systems, kitchen tables and chairs, decorative items, design and decoration, equipment and cleaning equipment, accessories.

b. Industrial kitchens: food processing equipment (meat grinder, industrial slicer, sausage cutting machine, etc.), food preparation equipment (cooking systems), food serving equipment (self-service line, catering, etc.), storage equipment ( fixed and mobile cold storage, all kinds of refrigerators & freezers, etc.), industrial dishwashers, restaurant and coffee shop equipment and accessories, accessories.

J. Field kitchens: all related equipment and tools.

:: Bath group:

All kinds of bathtubs, shower heads, wash basins, flush toilets and bidets, curtains, partitions and shower cabins, faucets and showers, sanitary equipment, bathroom mirrors and cabinets, PVC and metal pipes and fittings, all kinds of flooring, all kinds of lighting equipment, Decorative equipment, design and decoration, accessories.

:: Sauna group:

Sauna and swimming pool facilities, steam room, dry sauna and steam equipment, heat and steam production systems, jacuzzi, steam boilers, hydrotherapy tubs, faucets, PVC and metal pipes and fittings, lighting equipment, decoration equipment, design and Decoration, accessories.

:: Pool group:

Implementation of outdoor and indoor swimming pools (home and sports), diving platforms, prefabricated pools, inflatable pools, water purification and filtration systems, water parks, pool cleaning equipment, chlorine and water disinfectants, movable ceilings, Swimming pool equipment, lighting and lighting equipment, solarium, solar cells, insulating materials, various colors and coatings for swimming pools, swimming pool lights, pipes and related connections, swimming pool ceramics, design and decoration, accessories.

Exhibition In Details

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
 Exhibition In Details


Exhibition Title: International Exhibition of Pipes, Fittings, Sanitary Vales & Related Industries & Services

Organizer: Tehran International Trading & Exhibition Corporation (TITEX)

Supported by: Iran Trade Promotion Organization (ITPO), Iran International Exhibition Co. (IIE,)

Association Of UPVC Windows & Doors System Manufacturers And Iran UPVC Association

Country: Iran

City: Tehran

Date: January 2026

Exhibition Covered Area: More than 12000 sqm.

Exhibition Halls: 5 - 6 - 7 - 8-9 - 27 & Open Area

Contact Numbers: (+98 21) 26378249 , (+98 21) 26378251

Phone: 00989123234600

Email: info@titexgroup.com

Website: www.titexgroup.com

Registration form

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
 Registration Form

 

 

General terms & Condition

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
General terms & Condition

- The organizer, Tehran Int’l Trading & Exhibition Corporation (TITEX), reserves the right for acceptance or rejection of the applications and will not be liable for any explanation.
- The registration will be approved only after receiving the receipt of the payment of 50% of the rental charges together with the application form, otherwise the application will not be considered by the organizer.
- The organizer is fully authorized to determine or change (if necessary) the location of the stands.
- A first come first serve basis will be applied in the registration process and stand allocation.
- Should there be any Iranian agent responsible for the participation procedures, the agent should be introduced in written words by the original company.
- Any delay occurring in the payment of the rental charges will entitle the organizer to withdraw from the contract for the entire allocated space.
- To avoid any probable difficulty regarding the money transfer, the rental charges should be paid in Euro.
- Participant is not allowed to sublet or share his allocated space with others without prior consent of the    organizer.
- Participant wishing to cancel his participation or reduce the requested space should inform the organizer at least 45 days prior to the exhibition. In this case 25% of the rental charges will be confiscated by the organizer and the rest 75% will be returned to the exhibitor. Any cancellation or space reduction during the 45 days before the exhibition will be rejected and no reclamation will be accepted.
- Inserting the exhibitor’s data in the official book (catalogue) of the fair is obligatory. So the exhibitor is obliged to supply the organizer with the requested information and pay the relevant charge, ultimately 45 days prior to the exhibition.
- General watching of the halls and pavilions will be provided for the whole period of the fair. Participants are obliged to safeguard their stand and exhibits during the visiting hours. The halls will be duly locked and sealed after the closing hour.
- To avoid any probable loss during the fair, participants are advised to insure their goods and equipments.
- The exhibitors are obliged to be present in their stand, up to the last day - 6 p.m. - and not allowed to repack the exhibits.
- Participants are not allowed to put their exhibits or equipment in the aisles. Otherwise the occupied space will be calculated and should be paid for.
- Spot sale is prohibited during the fair and if not considered, the organizer is authorized to prevent it or even close the exhibitor’s stand. But the exhibitors are allowed to release definitely one or two samples out of each type of their goods and sell them after the fair. No letter of credit or order registration is needed in this case.
- Extra furniture and equipment are available upon the exhibitor’s request. The rental charges for these extra facilities should be paid to the organizer on due time and according to the relevant price list.
- Construction, decoration and setting up the stands and goods should be completed 24 hours before the opening of the fair and all unnecessary materials and empty cases should be removed from the fair ground.
- If the stand is constructed in 2 floors; the space of the second floor will be charged upon the basis of 50% of the rental charges per each square meter.
- Participants should vacate their space not later than 48 hours after the termination of the fair, otherwise the organizer will remove the left articles directly and in this case the exhibitor is responsible for any damages to his articles and also should pay the expenses of transportation and store-keeping of the goods.
- If the payments are not acted completely by the participants, the organizer is allowed to confiscate the participants’ exhibits.  If the value of the exhibits is less than the assigned charges, the organizer is entitled to take legal action for the settlement.
- Printed materials such as brochures, pamphlets, posters, … and also audio-visual cassettes or CDs should be checked by the organizer before displaying or distributing in the fair.
-  Environmental publicities such as slogans, placards, and wall writing … will be subjected to additional charges followed by the prior approval of the organizer.
- Alcoholic drinks, arms, drugs, pictures or films contrary to the Islamic rules are strictly forbidden to display in the stands.
- Importing goods and machineries should be sent to the customs warehouse after the termination of the fair.
- Flammable articles and empty cartoons are banned from storage in the halls.
- The exhibitor or his official representative should be actively present in the stand during the whole visiting hours.
- Participant’s banners or signboards must be put within the area of their allocated sites.
- Participants not utilizing the organizers facilities for erecting their stands should submit two series of the layout of their stand construction, together with the layout of internal electric extension at least 45 days before the fair. These layouts should be confirmed by the technical department of the fair. Otherwise must be changed according to the organizer’s instructions.
- Participants requiring water supply, telephone connection or 3 phase electricity for their stand should apply for them at least 45 days before the fair. Relevant charges will be calculated and should be paid before ending the fair.
- Participants must inform the organizer about their machinery that consumes electricity more than 5kw/h at least 45 days before the fair. Extra charges for electricity and water consumption should be paid by the exhibitor upon the organizer’s announcement.
- Participants wishing to display heavy, high or voluminous machines or products should inform the organizer at least 45 days prior to the event.
- Participant is responsible for any damages to the stand equipments and furniture and should compensate the losses according to the organizer’s announcement.
- The exhibitors will be informed by the organizer about all the details and instructions in circular letters. The organizer doesn’t accept the consequences of disregarding these circular letters.
- Oral agreements are valid only after they have been confirmed in writing and signed.
- In case of occurring unexpected and force majeure events, such as war, anarchy, natural disasters… which may postpone the fair or cancel it at all, the organizer is not liable for losses and no claim on damages or returning the money is accepted.
- Any claims by the exhibitors against the organizer will be accepted only up to 30 days after the termination of the fair. All complaints must be preliminary brought to the notice of the organizer before they are taken to any other legal bodies.

These regulations are adjusted in accordance with the UFI's rules & laws and are current in all international big fairs. So the exhibitors are requested to read and follow them accurately.

Overseas Agents

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
Overseas Agents

In order to expand and develop the international participation in our exhibitions, we make cooperation and partnership with our agents in other countries, especially with those who have great potentialities to do business in Iran.

For the 9th Pivex we have official agents in China. So the Chinese exhibitors who want to participate in this event can contact them directly. However, we appreciate to expand such collaboration into many other countries. Those exhibition organizing companies who are interested in making partnership for our exhibitions, are invited to contact us for the details.

Exhibition Services & Extra Equipment

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
Exhibition Services & Extra Equipment

The exhibitors who wish utilize the services offered by the organizer can announce their needs and requirements in due time.

Different services could be provided by the organizer upon the exhibitors’ request. All of these services will be charged for, according to ratio of their type and utilization:

Special stand construction and equipment services

Shell scheme booths and constructed stands may differ according to their design and decoration or material :

Prefabricated ordinary stands will be normally provided by the organizer if you choose the option of the prefabricated stands. Ordinary stands in Octa norm system are included by partition walls, spotlights, floor covering, fascia, electricity outlet and 1 table and 2 chairs for each 12 square meter.

:: Special prefabricated stand :

The exhibitors can choose also the special shell scheme which is beautifully designed and equipped by light boxes, warehouse, trash bins, special tables and chairs, in addition to the basic equipment which is provided in normal Octa norm stands with the lowest prices. Furthermore free invitation cards, free insurance and free electricity consumption will be offered only to the special prefabricated stands.

:: Special design stands :

Apart from the prefabricated stands, you can order for special design and construction.

The initial design of your stand will be provided in 3D files and you can observe how your stand looks.

According to the exhibitor’s desire, the organizer can provide completely different design for the stands with the materials other than the prefabricated system. These special stands are made by wood, MDF, HDF, aluminum frames or other available material which may be ordered by the exhibitors. Based upon the layout of such stands, the organizer will announce the expenses for building up, provided that the exhibitor send his/her order in due time. Special construction has different expenses according to the type and shape of your stand, its material and equipment or furniture. This option should be asked by the exhibitors not later than 2 months before the event.

Such services will be provided by different designing companies in Iran. But the company who will be offered by the organizer is the official designing company of this exhibition.

:: Extra equipment and facilities for the stands :

Any needed extra equipment such as , Refrigerator , Furniture , Showcase and Will be supplied by the organizer upon the expenses of each one :

    Extra Equipment list , Picture and Expenses

    Extra Equipment Application Form

:: Hotel reservation and accommodation facilities :

Upon your request we will arrange hotel or resort for your exhibitors. Please inform us if you wish to be enjoyed of the accommodation services. The price list will be sent to you to select the best options.

:: Invitation letters and visa procedures :

We will provide invitation letters and application forms that you may need for visa issuance. Our partner travel agent will also assist you for any services you may need for your accommodation during your stay in Tehran. The deadline for applying visa is 45 days before the exhibition.

:: Transportation services :

We could manage to pick you up from the airport to your hotel and vice versa, upon your request. Your daily transportation between hotel and the fairground will also be provided by the relevant staff.

Publicity & Advertisement services

If the exhibitor wishes to publicize in the media, local newspapers, networks, periodicals or any advertising environments, the organizer will supply him/her with the relevant services with the lowest expenses, provided that the orders received in due time.

Tehran International Permanent Fairground

The 10th International Exhibition of Pipes, Fittings, Sanitary Valves & Related Industries & Services
January 2026
Tehran International Permanent Fairground
 

 

Tehran International Permanent Fairground is the most famous and magnificent exhibition site in Iran. It has been spread on a large area of more than 80.000 m2 indoor and 35.000 m2 outdoor spaces. 34 active exhibition halls are hosting more than 70 different exhibitions every year. Necessary services and requirements are available at the fairground, such as customs office, bank, insurance, 9 conference halls, internet, restaurants, truck, lift truck and winch, communication facilities and so on.

The exhibition site has been located in the best geographical situation of Tehran which makes it available easily to the all important and necessary points and the downtown by several main highways.

Three 4 & 5 star hotels are close to the fairground, less than 5 minutes by distance.

:: Venue

Tehran International Permanent Fairground, Chamran Express way, Vali-e Asr Ave., Tehran, Iran

Telephone No. : +98 21 21919

Fax No. : +98 21 22 66 26 72-3

URL : www.iranfair.com

 Copyright 2023, All Rights Reserved
 Designed by ModernDesign.ir